Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 120)

Accessing the target modules via select keys
118 · G&D DVICenter
5. Change the desired data of the select key set:
6. Click OK to save your settings.
Defining select keys for the target modules
How to define the select keys for target modules:
1. Click on the User area > User entries in the tree view.
2. Right-click on the user account to be configured and click Configuration in the con-
text menu.
3. Click the Matrix systems > Personal Profile > Matrix switch tabs.
4. Use the Select key set entry to choose the select key set to be edited and click Edit.
5. Click the Assigned targets tab.
6. Use the drop down menu to select the type of target modules to be displayed in
the select window. The following options are available:
7. Use the Keys column to select the device whose select key you want to change
and then enter the desired character(s).
8. Click OK to save your changes.
Name: Enter the name of the select key set.
Comment: Enter any comment regarding the select key set.
Global: Mark this entry if you want the select key set in the personal pro-
file to be available for all users of the KVM matrix system.
NOTE: Global select key sets can only be edited by users with activated Superuser
right (see page 72).
Without this right, only the select keys, which are assigned to the target modules,
can be viewed.
[All targets] displays all target modules within the KVM matrix system
[Not assigned] only displays the target modules that are [Not assigned] to
the view filter
Search... This option opens another window. Select the desired
view filter in the tree view to display only the herein con-
tained devices in the select window.