Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 126)

Automatically or manually switching the target modules
124 · G&D DVICenter
Changing a scanmode set’s name, comment or
global assignment
How to change a scamode set’s name, comment and/or Global setting:
1. Click on the
User area > User entries in the tree view.
2. Right-click on the user account to be configured and click Configuration in the con-
text menu.
3. Click the Matrix systems > Personal Profile > Matrix switch tabs.
4. Select the scanmode set to be edited in the Scanmode set row and click Change.
5. If required, change the following data:
6. Click OK to save your settings.
Assigning the target modules to a scanmode set
How to define the select keys for target modules:
1. Click on the User area > User entries in the tree view.
2. Right-click on the user account to be configured and click Configuration in the con-
text menu.
3. Click the Matrix systems > Personal Profile > Matrix switch tabs.
4. Select the scanmode set to be edited in the Scanmode set row and click Edit.
5. Click the Member tab.
Name: Enter the name of the scanmode set.
Comment: Enter any comment regarding the scanmode set.
Global: Mark this entry if you want the scanmode set in the Personal Pro-
file to be available for all users of the KVM matrix system.
NOTE: Global scanmode sets can only be edited by users with activated Superuser
right (see page 72).
Without this right, only the assigned target modules can be viewed.