Getting started, Starting the web application, Security instructions of the web browser – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 14
Getting started
12 · G&D DVICenter
Getting started
This chapter describes how to operate the web application.
Starting the web application
The web application can be operated on a computer with installed Java Runtime Envi-
ronment. Use one of the supported web browsers to run this application.
How to start the web application:
1. Enter the following address to call the web application:
https://[ip address of the device]
Security instructions of the web browser
The device, on which the web application is operated, stores an SSL certificate that
enables the user or the web browser to authenticate the opposite site.
The certificate contains the following features:
NOTE:
The following chapters give a detailed overview of all functions and config-
uration settings.
NOTE:
Information regarding the system requirements of the web application are
NOTE:
You can also start the web application via http connection (port 80). In this
case it is not possible to authenticate the opposite side via certificate.
MD5 fingerprint:
8C:A3:48:22:59:5D:E6:E0:0D:95:BA:11:D2:E4:F1:63
SHA1 fingerprint:
1E:8C:7C:BC:A9:ED:C1:27:43:16:16:AB:7B:3D:89:2F:21:E9:B6:CC
IMPORTANT:
Replace the certificate that is included in the defaults of the device
with an individual certificate, which is related to the device. Information on how
to create such a certificate is given on page 30.