Enabling the support for special ps/2 keyboards, Support of any usb device – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 106
User consoles
104 · G&D DVICenter
How to select the scancode set of the PS/2 keyboard:
1. In the directory tree, click
KVM matrix systems > [Name] > User modules
.
2. Right-click the user console you want to configure. Now click on
Configuration
on
the context menu.
3. Click on the
General
tab
4. Use the
Scancode Set
entry to select between the following options:
5. Click
OK
to save your settings.
6. Restart the user console to apply your changes.
Enabling the support for special PS/2 keyboards
How to enable the support for a special PS/2 keyboard:
1. In the directory tree, click
KVM Matrix systems > [Name] > User modules
.
2. Right-click the user console you want to configure. Now click on
Configuration
on
the context menu.
3. Click the
General
tab
4. Use the
Enh. Keyboard
entry to select between the following options:
5. Click
OK
to save your settings.
Support of any USB device
In the
Generic-HID
mode, the data from the USB devices connected to the top
Keyb./
Mouse
interface is transmitted to the active target module.
In the
Generic-HID
mode, you can connect USB hubs or USB composite devices to the
top
Keyb./Mouse
interface of the user module.
Set 2:
Enables scancode set 2
Set 3:
Enables scancode set 3
Default:
Standard keyboard
PixelPower Clarity (blue):
Special »PixelPower Clarity (blue)« keyboard
PixelPower Rapid Action:
Special »PixelPower Rapid Action« keyboard
SKIDATA1:
Special »SKIDATA1« keyboard
IMPORTANT:
The
Generic HID
mode supports many common HID devices. How-
ever, the operation of any particular HID devices in
Generic HID
mode cannot be
guaranteed.
NOTE:
When the
Generic-HID
mode is enabled, it is not possible to operate the OSD
with a keyboard connected to the top
Keyb./Mouse
interface.