User consoles, Operating modes of user consoles, Standard operating mode – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 102: Open access operating mode, Video operating mode
User consoles
100 · G&D DVICenter
User consoles
The target computers connected to the system are operated at the user consoles of
the KVM matrix system.
Operating modes of user consoles
Depending on the intended use of the user console, the console’s operating mode
can be selected from the following options:
Standard operating mode
The standard operating mode only permits the access to the KVM matrix system
after you have entered your username and your password.
The user rights can be individually adjusted in the settings of the user accounts.
Open Access operating mode
The access to the KVM matrix system is not password-protected.
For this user console, you can configure the same access rights as for a user account.
Video operating mode
A video console (only possible when combined with the optional Push-Get function) is
especially suited when used with a projector since mouse and keyboard do not have to
be connected.
If the video console is provided with mouse and keyboard, you can only make
entries at the on-screen display.
For this user console, you can configure the same access rights as for a user account.
NOTE:
This operating mode is preset in the default.
IMPORTANT:
The configured access rights do apply for all users at this user console.
IMPORTANT:
The configured access rights apply for all users at this user console.
NOTE:
A video console is not displayed.
As a result, an accessing video console is not highlighted to other accessing users.
A user without Multiuser rights can therefore access the user console simultane-
ously to the video console.