Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 146)

Expanding switchable signals
144 · G&D DVICenter
The display shows the current configuration. The left column ( Not assigned ) lists
the matrix switch modules you can add to the channel group.
4. Add more modules to or delete them from the channel group:
5. Click OK to save the new channel group.
Deleting a channel group
How to delete a multichannel configuration:
1. In the directory tree, click KVM matrix systems > [Name] > User modules
or Target modules .
2. Right-click a user or computer module you want to delete from a channel group.
3. On the context menu, click Channel group .
The current configuration is shown.
4. In the right column ( Assigned ), click a module that is assigned to one of the 2 to 8
channels or to the USB/RS232 channel.
Click (arrow left) to delete the module’s assignment.
5. Repeat step 4 to delete the assignment of other modules.
6. Click OK if only one module is left assigned to KVM channel 1.
The channel group is deleted.
NOTE: You can assign up to seven additional video channels and a USB or
RS232 channel to a computer’s or a console’s KVM channel.
Adding modules:  In the left column ( Unassigned ), click the module you
want to add. In the right column ( Assigned ) click the
channel to which you want to add the module to.
 Click (arrow right) to assign the module to the
chosen channel.
Deleting modules:  In the right column ( Assigned ), click the module you
want to delete from the channel group.
 Click (arrow left) to delete the module’s assign-
ment.
NOTE: The user and computer modules included in the channel group are
marked with a plus sign in the list of modules.
Click the plus sign to view the list of modules.
NOTE: The web application deletes a channel group if it does not contain any
other channels than KVM channel 1.