Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 16)

Getting started
14 · G&D DVICenter
The different sectors of the user interface perform various tasks. The following table
lists the intended use of each sector:
Toolbar : The toolbar allows you to exit the active session and access the
basic configuration of the web application. It is also possible to
use the third icon for viewing and editing the settings of the
Ports.
Tree view : The tree view shows the setting options.
User name : Name of user logged in to the web application
Filter function : The filter function can be used to limit the elements that are
displayed in the main view.
Enter a part of the name of the searched element into the text
field. Now, the main view only displays names that contain
this particular text.
Click
Delete to cancel the filtering.
Main view : After you selected an element in the tree view , the main
view displays the superior elements.
ADVICE: In the main view of KVM matrix system and KVM combinations,
you can switch between the Monitoring and the Info mode.
The main view of the Monitoring mode shows the values of the monitored features.
The Info mode shows important information like the firmware version, or the
device’s IP and MAC address(es).
Right-click the table, and select
Column view > Monitoring or Information to activate the
desired mode.