Target groups and view filters, Difference between target groups and view filters, Intended use of target groups – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 113: Intended use of view filters, Administrating target groups, The »new targets« target group
Target groups and view filters
G&D DVICenter · 111
Target groups and view filters
Difference between target groups and view filters
The target modules of the KVM matrix system can be arranged in target groups and
view filters.
Intended use of target groups
The creation of target groups enables the administrator to quickly assign the rights
of a user or a user group for all target modules within a group.
Intended use of view filters
View filters enable the users of a KVM matrix system to organise the different target
modules into views. Especially in large KVM matrix systems, the creation of view
filters provides better orientation.
You can group the target modules according to their location (e.g. the server room)
or to other features (e.g. to the operating system of the connected computer).
Administrating target groups
The »New Targets« target group
By default, the New dig.Targets target group is created in the KVM matrix system.
This group automatically contains all target modules as soon as they are first con-
nected to the KVM matrix system. For this, the computer connected to the module
has to be switched on.
If you want to provide a user or a user group with particular rights to all recently
connected target modules, change the device group rights (see page 77) of either the
user account or the user group.
NOTE:
The different target modules can be members of several target groups.