Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 57)

Device monitoring via SNMP
G&D DVICenter · 55
8. Click OK to save your settings and to leave the window.
How to delete existing traps:
1. Use the tree view to click on KVM matrix systems > [name] > Matrix switches .
2. Right-click the device to be configured. Now click the Configuration entry in the
context menu.
3. Click the Network > SNMP trap tabs.
4. Select the receiver to be deleted and click Delete .
5. Click OK to save your settings and to leave the window.
How to generate a test event:
1. Use the tree view to click on KVM matrix systems > [name] > Matrix switches .
2. Right-click the device to be configured. Now click the Configuration entry in the
context menu.
3. Click the Network > SNMP trap tabs.
4. Click on Generate test event .
5. Click OK to save your settings and to leave the window.
Privacy
passphrase:
Enter the privacy passphrase for secure communication with
the Network Management System.
Engine ID: Enter an Engine ID which clearly identifies the SNMP agent
within the network.
NOTE: If properly configured, the Trap message is displayed within your Network
Management System.