Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 151)

Replicating the database of a KVM matrix switch
G&D DVICenter · 149
Replicating the database
How to replicate the database:
1. Click System > Tools in the tree view.
2. Double-click Replicate data .
The Replicate database window lists the installed destinations to which the data-
base of the master matrix switch is replicated.
3. Under Port configuration , you can define if you want to replicate the port configura-
tion on the source devices.
4. Optional: Add or delete a destination or change its address settings if
required (see page 150).
5. Click Continue .
The configuration settings are subsequently copied to the different devices. All
status information are displayed and updated during the replication.
6. Click Close .
IMPORTANT: The user account from which you accessed the web application of
the master matrix switch is automatically used to log in to the destinations.
Please make sure that the user account exists on all destinations and holds the
superuser right!
NOTE: When establishing the connection to the devices, a symbol with a red
dot is displayed next to the destinations.
If the connection has been established, the device symbol and device name are
shown in brackets.
NOTE: If the number of ports differs between source device and target device,
the corresponding settings are not replicated.
IMPORTANT: A message alerts you about any problems that might occur during
the replication of target groups, global scan sets and/or global select key sets.
Please choose between the following options:
 All on this matrix switch: overwrite all existing target data of this type (target
groups, global scan sets or global select key sets) on this device
 All on all matrix switches: overwrite all existing target data of this type on all
devices
 Yes: overwrite target data
 No: skip target data