Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 104)

User consoles
102 · G&D DVICenter
Enabling or disabling user consoles
If you want to deny a user console access to the KVM matrix system, the user con-
sole can be deactivated.
How to enable or disable user console:
1. In the directory tree, click KVM matrix systems > [Name] > User modules .
2. Right-click the user console you want to configure and click Configuration on the
context menu.
3. Click on the General tab
4. Use the Enabled entry to select between the following options:
5. Click OK to save your settings.
Enabling or disabling startup while missing keyboard
By default, user modules start without a keyboard. After the startup, the console
monitor shows the OSD of the matrix switch. Ooperating the OSD, however, requi-
res a keyboard.
As an alternative, the user module can inerrupt startup by showing a message regar-
ding the missing keyboard. Once you connect a keyboard to the user module, the
startup process continues.
How to enable/disable the startup of a user module without a keyboard:
1. In the directory tree, click KVM matrix systems > [Name] > User modules .
2. Right-click the user module you want to configure and click Configuration on the
context menu.
3. Click the General tab
4. Under Keyboard required , you can choose between the following options:
5. Click OK to save your settings.
NOTE: If the user console is disabled, the monitor displays the message
»This console has been disabled«. It is therefore not possible to call the on-screen dis-
play or the login box.
If a user is accessing this user console, access is immediately withdrawn.
Enabled: User console is enabled
Disabled: User console is disabled
Yes: User module can be started only when a keyboard is connected.
No: User module can be started without a keyboard (default).