Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 129)

Configuring the On-Screen Display (OSD)
G&D DVICenter · 127
Configuring the On-Screen Display
(OSD)
The on-screen display of the KVM matrix system enables the user to operate and con-
figure the system. By default, the on-screen display is provided at all user consoles.
Configuration
Many of the on-screen display’s basic functions can be adjusted to your demands.
You can define the hotkey as well as the position and font size of the on-screen display.
Any settings that can be adjusted to your needs are described on the following
pages.
Changing the hotkey to call the OSD
The hotkey to call the on-screen display (OSD) is used at all consoles within the
KVM matrix system. This hotkey enables you to open the OSD in order to operate
and configure the system.
The hotkey consists of at least one hotkey modifier key and an additional hotkey,
which you can freely select.
Both the Ctrl hotkey modifier key and the Num hotkey can be configured by the user.
How to change the hotkey to call the on-screen display:
1. Click on KVM Matrix systems > [Name] > Matrix switches in the tree view.
2. Right-click the display range of the master matrix switch and click the Configura-
tion entry in the context menu.
3. Select at least one of the listed modifiers in the Hotkey modifier entry by marking
the entry:
NOTE: In the default, the hotkey Ctrl is preset.
 Ctrl
 Alt
 Alt Gr
 Win
 Shift