Altera Avalon Verification IP Suite - Manual (Page 92)

set_enable_c_read_byteenable()
set_enable_c_read_byteenable() Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group ensures all legal values of the
byteenable
signal
are asserted during read transfers. It is disabled when either
byteenable
or
read is not supported.
Description:
Verilog HDL Language support:
set_enable_c_read_latency()
set_enable_c_read_latency()
Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void Returns:
Enables a coverage group to test all values of the read latency parameter.
This method is disabled if
read
or
readdatavalids
are not supported, or
if the maximum read latency is less than 1.
Description:
Verilog HDL Language support:
set_enable_c_read_response()
set_enable_c_read_response() Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test each bit of the valid readresponse that
represent dfferent status. Description:
Verilog HDL Language support:
Avalon-MM Monitor Altera Corporation
Send Feedback
set_enable_c_read_byteenable() 7-20