Altera Avalon Verification IP Suite - Manual (Page 91)

set_enable_c_read()
set_enable_c_read() Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test read transfers. This method is disabled when
reads are not supported. Description:
Verilog HDL Language support:
set_enable_c_read_after_reset()
set_enable_c_read_after_reset()
Prototype:
Verilog HDL: Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test read transfers after reset. Description:
Verilog HDL Language support:
set_enable_c_read_burstcount()
set_enable_c_read_burstcount()
Prototype:
Verilog HDL: Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group tests different sizes of
burstcount
during read
burst transfers. Tests all possible values of burstcount . Disabled when either
burst transfers or reads are not supported, or the maximum burst is less than
1.
Description:
Verilog HDL Language support:
Altera Corporation Avalon-MM Monitor
Send Feedback
7-19 set_enable_c_read()