Get_command_transaction_id(), Get_command_write_response_request(), Get_read_response_queue_size() – Altera Avalon Verification IP Suite User Manual
Page 102

get_command_transaction_id()
AvalonTransactionId_t get_command_transaction_id()
Prototype:
Verilog HDL: None
VHDL:
command_transaction_id
,
bfm_id
,
req_if(bfm_id)
Arguments:
AvalonTransactionId_t
Returns:
Queries the received command descriptor for the transaction ID.
Description:
Verilog HDL, VHDL
Language support:
get_command_write_response_request()
AvalonTransactionId_t get_command_write_response_request()
Prototype:
Verilog HDL: None
VHDL:
command_write_response_request
,
bfm_id
,
req_if(bfm_id)
Arguments:
AvalonTransactionId_t
Returns:
Queries the received command descriptor for the
write_response_request
field value. A value of 1 indicates that the master has requested for a write
response.
Description:
Verilog HDL, VHDL
Language support:
get_read_response_queue_size()
int get_read_response_queue_size()
Prototype:
Verilog HDL: None
VHDL:
read_response_queue_size
,
bfm_id
,
req_if(bfm_id)
Arguments:
int
Returns:
Queries the read response queue to determine number of response descriptors
currently stored in the BFM. This is the number of responses the test program
can immediately remove from the response queue for further processing.
Description:
Verilog HDL, VHDL
Language support:
Avalon-MM Monitor
Altera Corporation
get_command_transaction_id()
7-30