Set_enable_c_idle_in_read_response(), Set_enable_c_idle_in_write_burst(), Set_enable_c_pending_read() – Altera Avalon Verification IP Suite User Manual
Page 90

set_enable_c_idle_in_read_response()
set_enable_c_idle_in_read_response()
Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to count idle cycles during a read burst response.
This method is disabled if reads or
readdatavalids
are not supported.
Description:
Verilog HDL
Language support:
set_enable_c_idle_in_write_burst()
set_enable_c_idle_in_write_burst()
Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to count idle cycles during a write burst transaction.
This method is disabled if writes are not supported.
Description:
Verilog HDL
Language support:
set_enable_c_pending_read()
set_enable_c_pending_read()
Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test pending read support. It covers all values
for up to the maximum number of pending reads. This method is disabled
when either reads or pipelined reads are not supported.
Description:
Verilog HDL
Language support:
Avalon-MM Monitor
Altera Corporation
set_enable_c_idle_in_read_response()
7-18