Altera Avalon Verification IP Suite - Manual (Page 87)

set_enable_c_b2b_write_write()
set_enable_c_b2b_write_write() Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test back-to-back write transfers. This method
is disabled if writes are not supported. Description:
Verilog HDL Language support:
set_enable_c_continuous_read()
set_enable_c_continuous_read()
Prototype:
Verilog HDL: Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test continuous read transfers from 2 cycles
until
AV_MAX_CONTINUOUS_READ
. Continuous read cycles of more than
AV_
MAX_CONTINUOUS_READ
goes to another bin.
Description:
Verilog HDL Language support:
set_enable_c_continuous_readdatavalid()
set_enable_c_continuous_readdatavalid()
Prototype:
Verilog HDL:
Boolean
VHDL: N.A.
Arguments:
void
Returns:
Enables a coverage group to test continuous readdatavalid transfers from
2 cycles until
AV_MAX_CONTINUOUS_READDATAVALID
. Continuous read cycles
of more than
AV_MAX_CONTINUOUS_READDATAVALID
goes to another bin.
Description:
Verilog HDL Language support:
Altera Corporation Avalon-MM Monitor
Send Feedback
7-15 set_enable_c_b2b_write_write()