Pilz PNOZ mm0p 24VDC - Manual (Page 87)

RS232/Ethernet interfaces
Operating Manual PNOZmulti communication interfaces
1001154-EN-13
87
Send data from the PNOZmulti in table form
Request 0x2F
The communication partner uses this request to request data from the PNOZmulti in table
form.
The content of the tables and segments is described in detail in the Appendix.
Telegram
Byte Request Byte Response
0 0x05 0 0x05
1 0x15 1 0x15
2 0x00 2 0x00
3 0x07 3 0x14
4 0x2F 4 0xAF
5 0x00 5 0x00
6 0x00 6 0x00
7 0x00 7 0x00
8 Table No. 8 Table No.
9 Segment No. 9 Segment No.
10 BCC 10 Byte 0 of Table x,
Segment y
11 0x10 ... ...
22 Byte 12 of Table x,
Segment y
23 BCC
24 0x10
} Byte 8: Table number
Example: 0x15 for Table 21: Process data, right-hand expansion modules
} Byte 9: Segment number
Example: 0x00 for Segment 0, in Byte 4 state of outputs o0 ... o7 of the right-hand ex-
pansion modules
Information
If the requested segment is unavailable, the Segment No. is set to 255.
Example:
Request: Table No. 20 Segment No. 45
Response: Table No. 20 Segment No. 255
Byte 10 ... 22 = 0
5.7.4