Pilz PNOZ mm0p 24VDC - Manual (Page 49)

Fieldbus modules
Operating Manual PNOZmulti communication interfaces
1001154-EN-13
49
Sub-Index
(dec) Contents Example/explanation
45 Configuration, 1st expansion
module, right
Sub-Index 45 ... 52 contains the Hex code for the expan-
sion modules on the right:
PNOZ mi1p: 08
PNOZ mi2p: 38
PNOZ mo1p: 18
PNOZ mo2p: 10
PNOZ mo3p: 30
PNOZ mo4p: 28
PNOZ mo5p: 48
PNOZ mc1p: 20
PNOZ ms3p: 68
PNOZ ms4p: 78
PNOZ ms1p/PNOZ ms2p: 88
PNOZ ms2p HTL: 58
PNOZ ms3p HTL: 64
PNOZsigma with one output: 11
PNOZsigma with two outputs: 22
No expansion module: 00
46 Configuration, 2nd expansion
module, right
47 Configuration, 3rd expansion
module, right
48 Configuration, 4th expansion
module, right
49 Configuration, 5th expansion
module, right
50 Configuration, 6th expansion
module, right
51 Configuration, 7th expansion
module, right
52 Configuration, 8th expansion
module right
53 ... 56 Reserved
57 1st character (Low Byte) Sub-Index 57 ... 88 contains the project name defined in
the PNOZmultil Configurator under "Enter project data";
this is stored in UNICODE format, 2 Bytes contain the Hex
code of the individual UNICODE characters.
58 1st character (High Byte)
59 2nd character (Low Byte)
60 2nd character (High Byte)
61 3rd character (Low Byte)
62 3rd character (High Byte)
63 4th character (Low Byte)
64 4th character (High Byte)
65 5th character (Low Byte)
66 5th character (High Byte)
67 6th character (Low Byte)
68 6th character (High Byte)
69 7th character (Low Byte)
70 7th character (High Byte)
71 8th character (Low Byte)
72 8th character (High Byte)