Pilz PNOZ mm0p 24VDC - Manual (Page 130)

Diagnostic word
Operating Manual PNOZmulti communication interfaces
1001154-EN-13
130
} Evaluation via the RS232/Ethernet interfaces
The diagnostic word is requested via the interface on the base unit/communication
module using the element's ID.
Information
Detailed information can be found in the section entitled "RS232/Ethernet
interfaces".
} Evaluation via a fieldbus
The diagnostic word is requested via a connected fieldbus module, via the element's ID.
Information
Detailed information can be found in the section entitled "Fieldbus modules".
Element with status
Element with
ID = 1 ... 100
Diagnostic word
for
element with
ID = 1 ... 100
Output
Element with
ID = 1 ... 100
PVIS:
e.g. Activate
Bit 2
and 3
PNOZmulti Configurator
PNOZmulti base unit
Integrated
interface
PNOZmulti fieldbus module
Fieldbus
Link bit
within the
user
program
e.g. to an
output
Diagnostic word element
Read diagnostic word Read diagnostic word or display
the event messages and actions
using the PMImicro diag for example
Download
project
PVIS