Pilz PNOZ mm0p 24VDC - Manual (Page 100)

Modbus/TCP
Operating Manual PNOZmulti communication interfaces
1001154-EN-13
100
Configuration
The table below describes the Modbus/TCP data areas that contain the device data from
the base unit and the project data. The data was defined in the PNOZmulti Configurator.
Relevant areas for the data are defined in the Modbus/TCP data areas Discrete Inputs (1x)
and Input Register (3x). Read access is available to these data areas.
Register
(3x) Discrete Input
(1x)
Content High Byte Low Byte
784 12559... 12544 Product number HH Byte HL Byte
785 12575... 12560 Product number LH Byte LL Byte
786 12591... 12576 Device version HH Byte HL Byte
787 12607... 12592 Device version LH Byte LL Byte
788 12623... 12608 Serial number HH Byte HL Byte
789 12639... 12624 Serial number LH Byte LL Byte
790 12655... 12640 Reserved
791 12671... 12656 Check sum safe H Byte L Byte
792 12687... 12672 Overall project check sum H Byte L Byte
793 12703... 12688 Date of project Day Month
794 12719... 12704 Date of project Year (H
Byte)
Year (L Byte)
795 12735... 12720 Operating hours HL Byte LH Byte
796 12751... 12736 Operating hours / Type of
base unit
LL Byte Type
797 12767... 12752 Reserved
798 12783... 12768 Configuration, fieldbus
modules / RS232 / ex-
pansion module, right
Slot 1 Fieldbus
799 12799... 12784 Configuration, expansion
module, right
Slot 3 Slot 2
800 12815... 12800 Configuration, expansion
module, right
Slot 5 Slot 4
801 12831... 12816 Configuration, expansion
module, right
Slot 7 Slot 6
802 12847... 12832 Configuration, expansion
module, right
Reserved Slot 8
803 12863... 12848 Reserved
804 12879... 12864 Reserved
805 12895... 12880 Project name 1st character
(H Byte)
1st character
(L Byte)
806 12911... 12896 Project name 2nd charac-
ter (H Byte)
2nd character
(L Byte)
807 12927... 12912 Project name 3rd charac-
ter (H Byte)
3rd character
(L Byte)
6.4.4.5