Maxim Integrated High-Speed Microcontroller - Manual (Page 176)

High-Speed Microcontroller User’s Guide
19. REVISION HISTORY
REVISION
DATE
SECTION
NUMBER
DESCRIPTION
PAGES
CHANGED
4.2
In the Watchdog Control (WDCON) register description, changed reset
values for bit 6 and bits 3 to 0 (from W to T).
45
031607
16
In the “EXPLANATION” column for XCH A, Rn; XCH A, direct; SCH
A, @Ri; XCHD A, @Ri, corrected “=” to “
”.
159
9
Removed note about DS87C550 micro incorporates several interrupt
vectors whose locations differ from those used by the high-speed
microcontroller family or other 8051 devices.
99
042307
18 In Table 18-A, removed DS87C550 column and device data. 167
030308 6.1 Removed sentence about the DS87000 microcontroller. 72
062210 4.2 In Table 4-D, corrected the reset values for P1 to all ones. 20
176 Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
© 2010 Maxim Integrated The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.