Note – Brother WP330MDS User Manual

Page 99

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. Insert the destination diskette and press RETURN. The word processor will

transfer the files that have been read from the source diskette onto the

destination diskette. If all the files on the source diskette have not been

transferred, the word processor will prompt you to reinsert the source diskette,

repeat steps (2) and (3) until all files have been transferred. This may happen

several times until all files are transferred to the destination diskette.

NOTE:

The word processor recognizee the source diskette and the destination diskette.

If you inadvertently insert the wrong diskette,

one

of the following messages will

appear:

Diskette types not compatible. Insert 720KB/2DD diskette and press RETURN.

Diskette types not compatible. Insert 1.44MB/2HD diskette and press RETURN.

NOTE:

You may press

CANCEL

at any time (except during diskette access) to stop the

DISK COPY

operation.

When the diskette Is

copied, the

INDEX

screen reappears.