Brother WP330MDS - Manual (Page 90)

NOTES:
• Printing in progress can be terminated by pressing CANCEL.
• When printing is completed (or canceled with the CANCEL key), the system
returns to the WRITE/EDIT screen (page printing) or to the WP INDEX screen
(file printing).
Daisy Wheel Changes
Each time the word processor finds a pitch change in the file, and, it you have set the
PAUSE FOR KB CHANGE option to YES, each time the word processor finds a
keyboard change, printing is interrupted and a message similar to the following will
appear:
Change to KB:II 12 wheel and press RETURN.
This means that an international daisy wheel of pitch 12 is required at this point.
Change the wheel and press RETURN to resume printing,
NOTE:
If PAUSE FOR KB CHANGE 1$ set to NO in the print menu screen, printing will
stop for pitch changes, but not for keyboard changes.
Stop Symbols
T CODE ^
(s ]
----------- -i
^SCODE j
stop symbols ^ can be placed in your file to instruct the printing to stop at a
particular point. When printing stops, your word processor automatically switches to
the typewriter application and you are able to insert text at that position. This feature
is primarily used for applications using form letters with minor changes. For example,
if you need to send out two identical letters and the only information that is different is
the name and address of the person the letter is being sent to. proceed as follows:
1
.
2
.
3.
When creating the letter, press CODE + S (S CODE) to insert a stop code at the
point where the name and address appears. During printing, you will be able to
manually type in the appropriate name and address when the printing stops.
Save your file and start file printing as explained above.
When the word processor finds a stop code, printing is interrupted and the
following message appears;
Stop code. Type text and press PRINT to continue.
80