Brother WP330MDS - Manual (Page 161)

Drawing the Frame
1
.
2
,
3.
4.
While in MOVE mode, move the cursor to the starting point of a vertical or
horizontal line.
Use CORRECT to switch to the ADD mode.
Move the cursor to draw the line and stop when you arrive at the desired end of
the line. For a horizontal line, use SPACE BAR to switch between a single and
double line.
Use CORRECT to switch to the MOVE mode and repeat steps (1) to (3) to draw
all the lines you want in your frame.
NOTE:
To delete
a
line, switch to the MOVE mode, position the cursor on the line to be
deleted, then switch to the DEL mode and move the cursor along the line. Switch
back to the MOVE mode when the line is deleted.
Printing the Frame
+
NOTE:
In order to print the frame properly, you must insert an International or Symbol
daisy wheel to print vertical and double horizontal lines. The keyboard should be
set to KB:U or KB:lJi to match the daisy wheel.
ifflSaSEE-; ALL DELETE
1. Press MENU to display the menu.
2. Type P to select PRINT.
• Short cut:
Instead of steps (1) and (2), press CODE +
P ^PRINT;,
3. Follow the instructions given in the message line.
151