Brother WP330MDS User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Use CODE + P DOWN or the platen knob to position the carrier where a
correction is required. Move the carrier to the character to be corrected with
BACKSPACE or SPACE BAR.
If
necessary, use CODE + BS 1 to accurately
position the carrier.
Congratulations on your purchase of this new word
A
2. Press CODE + CORRECT. The M.C indicator appears.
3.
Retype the same character again. The character ia erased and the M.C indicator
disappears.
Congr tulations on your purchase of this new word
A
4. Type the desired character.
Congratulations on your purchase of this new word
A
111