Brother WP330MDS - Manual (Page 160)

Mode & Cursor Shape Use this mode to...
DEL {) Delete vertical or horizontal lines by moving the
cursor along existing lines in the appropriate
directions. The cursor must be moved along the line
in the same direction in order to remove it, i.e., a
portion of a vertical line may not be removed by
moving the cursor horizontally through it, nor may a
portion of a horizontal line be removed by moving
vertically through it.
Keys and Functions
When the framing screen is displayed, the following functions are available;
Key Function
CORRECT Switches between the MOVE, ADD and DEL modes in
the following sequence, and displays a message to
indicate the current mode:
MOVE -» ADD DEL MOVE
(CODE +;
—^
t
Each press of the cursor keys moves the cursor one
column or line across the screen. In any of the MOVE,
ADD or DEL modes, when CODE is held down and a
cursor key pressed, the cursor will move to the next
line in that direction, without creating an additional
line. When there is no line for the cursor to stop at, the
cursor will proceed to column 1 or line 1, or column
135 or line 73.
SPACE BAR Toggles between single and double horizontal line.
The LINE indicator on the message line will indicate
the current status Of this function with or
RETURN Moves the cursor in any mode (MOVE, ADD or DEL)
to the left end of the following line.
CODE +
TSETTCLR
Sets or clears a tab at the cursor position. A framing
tab stop 1 will appear at the corresponding position
on the scale line. Up to 30 tabs can be set.
TAB Moves the cursor in any mode (MOVE, ADD, or DEL)
to the next tab stop to the right. If there is no tab set to
the right of the cursor, the cursor moves to the right
end (the 135th column).
150