Brother WP330MDS - Manual (Page 185)

On this screen, you can specify which Address Book data will be printed in label
format and the position of each data item. The data items are represented by the
letters a through k (default), as shown on the left side of the screen (the items marked
with an asterisk will be printed). The position of these letters in the label area on the
right of the screen determine the position of the items when they are printed in label
format.
The illustration above shows the default positions. For example, “ba” on the first line
indicates that the FIRST NAME (b) will be printed first, followed by the LAST NAME
(a). A space is automatically inserted between each item. To print punctuation marks,
such as a comma between city and state, you must include the punctuation mark
when you enter the data on the DATA INPUT screen.
If you do not want to change the default label printing position, press RETURN to start
printing.
To change the default label printing positions:
1.
2 .
3.
4.
On the left side of the screen, move the block cursor to the data item you want to
move or add. Press SPACE BAR. A second cursor appears in the label area on
the right side of the screen.
Move the cursor to the position where you want the data item and press
RETURN. The letter that represents the data item appears in the position you
have selected in the label area, and the second cursor disappears from the right
side of the screen.
Repeat steps 1 and 2 to reposition other data items.
To remove an item from the label area, move the cursor to that item on the left
side of the screen and press CORRECT.
When you have completed the position changes, press RETURN to start printing.
The leftmost label on the first line of the label area is printed from position “0” on
paper scale.
NOTE:
The total number of lines and maximum number of characters that you can print
on a single line of a label are shown in the following table.
175