Note, Switching to the other document, Returning to the normal write/edit screen – Brother WP330MDS User Manual
Page 102: Returning to the normal wrr b/edi i screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
XXXXXXXX POCX L:X?iX COLODDC PITCH:XX L.SP:XJC
E
Text of the first file
XXXXXXXX P:XX LOCXX COLXXX PITCHiXX L.SP:XJC KBXX
E
1
. . I Ì . . . 7 . . . . R . . .
Text of the socond file
5. You can now edit the document in the lower half of the screen exactly in the same
way as in the usual full-size WRITE/EDIT screen. The only difference is that the
text area is smaller.
NOTE:
It is possible to increase the text area by one line using the
SCALE LINE ON/
OFF
function. (See “Example 2: You selected FORM” on page 32.)
Switching to the Other Document
+
STYLE BLOCK CTR/RMF GRAMMARl GRAMMAR2 SEARCH jPOR3Vf -S PAGE PRINT
PAPER SIZE
iiHRADER
POOIER
SCALE
LINE
ON/OFF
PUAL SCREEN
1. Press MENU to display the menu.
2. Type
F
to select FORM.
3. Type C to select CHANGE SCREEN. The cursor immediately moves to the text
displayed on the upper half if it was in the lower half, and vice-versa.
• Short cut: Instead of (1), (2), and (3), press CODE + Q.
Returning to the Normal WRITE/EDIT Screen
To return to the normal WRITE/EDIT screen, you must save one of the two files that
are displayed on the dual screen.
1. Use the CHANGE SCREEN function described above to position the cursor on
the document that you want to save.
2. Press FILE and proceed to save or abandon the document. The document that
was not selected for saving is now displayed on a full-size WRITE/EDIT screen.
92