Brother WP330MDS - Manual (Page 115)

NOTE:
The line space setting is reset to its default value when you switch the power off,
then on.
Changing the Keyboard
CODE
+
1Г
KB
J
If you need to print characters that are not available on the current daisy wheel,
change the daisy wheel and press CODE + K (KB).
KB:I II in I
Keyboard Selection Use
I (Standard) English text
n (International) Languages using extra characters
Ш (Symbol) Mathematical symbols and Greek characters
NOTES:
• Please refer to "Character Keys” on page 264 for details.
• The keyboard eetting cannot b& changed while in display mode (centering, right
margin flush, decimal tab mode).
• The keyboard setting can be changed in LA. mode only before entering text on
the screen.
• The keyboard setting is reset to its default value when you switch the power off,
then on.
Using Shift Lock and Capital Lock
’^ shiftlock '^
CAPS
I
T CODE Л T wiftlock ^
+
'L==i>
Uppercase characters will be printed if you hold SHIFT down while pressing any
character key.
To type an entire string of uppercase characters, press SHIFT LOCK once. The
SHIFT indicator appears and all characters you type will be uppercase characters. To
cancel, press SHIFT.
If you want to enter strings of capital letters in combination with numbers, press CODE
+ CAPS. The CAPS indicator will appear and all alphabetic keys will type capitals
while other keys produce lower case characters. To cancel, press CODE + CAPS
again. When the CAPS indicator is on, holding down SHIFT temporarily changes the
CAPS indicator to the SHIFT indicator. Pressing SHIFT LOCK in the same
circumstance switches to SHIFT. Pressing SHIFT switches back to CAPS.
105