Brother WP330MDS - Manual (Page 210)

The Command Mode
The Command mode permits formatting and modifioation of an entire range of cells.
The Command mode is used to improve the layout of your spreadsheet.
Bold
Ji==j
i------i
1. Move the cursor to a corner of the range that you want to bold.
2. Press CODE + B (see “Help Menus" on page 182). The following menu appears:
iiUSiSd; BOUOOFF
3. Use and to select BOLD ON and press RETURN. The following message
appears:
Mark range to be bolded. Press RE^TURN wiicn done.
4. Move the cursor to the opposite corner of the range and press RETURN. The
cells of the range that already contain data appear in bold-face characters.
Empty cells are unchanged, but if you input data in one of them, the data will be
bolded.
NOTE:
To unbold a range of cells, proceed in the same way as above, but select BOLD
OFF in step (3).
Underline
'' CODE
-h
1. Move the cursor to a corner of the range that you want to underline.
2. Press CODE + N (see “Help Menus” on page 182), The following menu appears.
mm:
UNDERLINE OFF
3. Use and to select UNDERLINE ON and press RETURN. The following
message appears:
Mark range to be underlined. Press RETURN when done.
200