Setting tabs and decimal tabs, Clearing tabs, Typing with tabs – Brother WP330MDS User Manual
Page 123: Typing with decimal tabs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Tabs and Decimal Tabs
CODE
+
7
4
< * '
'.S'
+
8
4
Move the carrier to the desired position and press CODE + T SET to set an ordinary
tab, or CODE + DT SET to set a decimal tab.
NOTES:
• Tabs and decimal tabs cannot be set in the display mode.
• The tab settings are erased when you switch the power off.
Clearing Tabs
+
9
To clear a tab, move the carrier to that position and press the
CODE + T CLR.
To clear all tabs, hold down the same keys until this message appears:
All tabs cleared.
Typing with Tabs
TAB
1
PMD
=j
To move the carrier to the next tab to the right, press
TAB.
If there are no more tabs
or decimal tabs to the right, the carrier moves to the right margin. When the carrier is
on the desired tab stop, start typing. Press RETURN to
move
the carrier back
to
the
left margin and feed paper, or
TAB
to move to the next tab
Typing with Decimal Tabs
PMD
When you press
TAB
to move the carrier to the next decimal tab, the DTAB indicator
appears. When this indicator is on, you can type a number. This will be displayed on
the screen. When you type the decimal point, however, all that you have typed will be
printed with the decimal point aligned at the decimal tab You can then enter the
fractional part of the number, which is printed as you type it. The carrier then
moves to the
left
margin if you press
RETURN,
or to the next tab or decimal tab if you
press
TAB.
113