Brother WP330MDS - Manual (Page 254)

Insert the source (original) diskette and press RETURN. The word processor will start
reading files from the source diskette. Since the memory space is limited, the word
processor may not be able to read all files in one step. After a while, this message will
appear:
Soixrce disk: 720KB/2DD. Uee the same format type for destination disk
Insert source disk and press REiTURN.
or
Source disk: 1.44MB/2HD, Use the same format type for destination disk
Insert source disk and press RETURN.
3. Insert the destination diskette and press RETURN. The word processor will
transfer the files that have been read from the source diskette onto the
destination diskette. If all the files of the source diskette have not been
transferred yet, the word processor will ask you to re-insert the source diskette,
repeat steps (2) and (3) until all files have been transferred to the destination
diskette. You may need to swap these diskettes a number of times before all of
the files are copied to the destination diskette.
NOTE;
The word processor “knows" which diskette is the source diskette and which one
is the destination diskette. If you mistakenly insert a wrong diskette, one of these
messages will appear:
Incorrect disk. Insert destination disk and press RETURN.
Incorrect disk. Insert source disk and press RETURN.
4.
NOTE:
Press CANCEL at any time (except during disk access) to cancel the operation.
When copying is complete, the normal message of the INDEX screen reappears.
244