beautypg.com

Line-by-line mode, Notes, Justification mode – Brother WP330MDS User Manual

Page 111: Code + o (operate)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Line-by-Line Mode

^ C O D E ^

+

5 ]

O P E R A T E

i i /

You can enter the line-by-line mode and switch between the other sub-modes with

CODE + O (OPERATE).

1. Press CODE + O (OPERATE) while in the auto mode of the type mode to display

the L/L mode screen. A text area limited to a single line appears in the middle of

the screen.

NOTES:

In

UL

mods, automatic mturn is always activated.

If you need to justify your text, press CODE

+

O (OPERATE) again to activate the

justify function and display the JST indicator.

2. Type your text. The text is displayed on the screen and the carriage moves as you

type, although nothing is printed. If you press a dead key, the carriage does not

move

until

you have pressed the base character.

3. To print what you have typed, press RETURN, TAB, CODE + P IND, CODE + L

(L IND), or CODE + IND CLR. Printing will also be done automatically after you

type a character following a hyphen or a space in the hot zone.

Justification Mode

7 CODE ^

0

OPERATE

The Justification mode allows you to print text aligned to both left and right margins.

1

.

Press

CODE + O (OPERATE)

until the JST indicator appears.

2. Type your text. The text is displayed on the screen first and the carriage moves

simultaneously as you type. If you type a space in the hot zone, justified text is

printed and the carriage is automatically returned. Typing a hyphen in the hot
zone justifies after typing the next character.

101