Brother WP330MDS - Manual (Page 138)

The Spell Checker can be used to check each word as you type. You can do this
either in the WP or TW applications.
Checking While Typing (WP or TW Application)
Starting the Spell Checker
CODE
+
J Is
If you are working with the WP application, refer to “Starting the Spell Checker” on
page 125. The only differences between the “One Word” procedure and the “AH”
procedure are; 1) position the cursor at the location where you are going to type, and
2) when the option menu “ALL ONE WORD” appears, select ONE WORD. The Spell
Checker will be automatically activated.
If you are working with the TW application, proceed as follows:
STYLE CTR/RMF
: USER DICmONARy MAINTENANCE
; USER DICnONARY LOAD
USER DICTIONARY SAVE
EDIT THESAURUS
TYPE THESAURUS
1. Press MENU to display the function menu.
2. Type G to select GRAMMAR.
3. Type G to select GRAMMAR CHECK.
• Short cut: Instead of (1), (2), and (3), press CODE + GRAM.
Once Spell Check is started, the GR indicator appears on the screen. The words you
type are checked for spelling or redundancy. If an error is found, the system interrupts
your typing and displays a menu of options. In type mode, when you select a
suggested word, or when you retype a replacement word, the old word is
automatically erased and the system prints the replacement word.
NOTES:
• In the TW application, when you move the carriage or the cursor over existing
text, the system will detect errors even if it was started after typing that text (This
feature is limited to the current line).
• To disable Spell Check, press CODE + GRAM.
128