Note – Brother WP330MDS User Manual

Page 302

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TWAVP

LAYOUT

Turn the power on and use TW/WP to switch the

word processor to the Typewriter application.

(SPACE BAR)

fr.

BACKSPACE

BSI

Use SPACE BAR and BACKSPACE to move the
carrier to the center of the platen.

Lift the acoustic cover and remove the ribbon
cassette, if installed. (See “Changing Ribbons” on
page 290.)

NOTE:
It is not possible to move the carrier while the

acoustic cover is open. Close the acoustic

cover to re-position the carrier.

Grasp the spools with your thumbs in the

positions shown and pull them off their mounts.

Bring the tape back to a position parallel with the
platen and then lift it up and out.

Pass the new tape through the left guide, behind

the ribbon guide, and out through the right guide.

The rough side of the tape should face the platen.