Printing a range, Note – Brother WP330MDS User Manual

Page 218

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Printing a Range

CODE

Printing a range of cells is often a useful step when you are editing a spreadsheet. It
allows you to see how your work will actually look on paper. Remember that the
application also allows you to print an entire spreadsheet file from the

SPREADSHEET INDEX screen.

Before you print, use CODE + PITCH (1) to adjust the pitch to 10, 12, or 15

characters per inch.

You can split your spreadsheet manually by inserting page break symbols { ^ ) with

the CODE + P BREAK keys.

1. Move the cursor to a corner of the range that you want to print and press CODE +

P (PRINT). This message will appear;

Mark range to print. Press RETURN when done.

2, Move the cursor to the cell in the opposite corner of the range and press

RETURN. This message will appear;

Insert paper and press RETURN,

3. Insert paper and press RETURN. If the spreadsheet is too wide, you may need to

insert the sheet of paper horizontally. The word processor now asks you to

match the daisy wheel to the selected keyboard and pitch:

Change to KB;I 10 wheel and press RETURN.

Make sure that the daisy wheel installed matches the message specifications,

and press RETURN. Printing starts.

NOTE:

To pause during printing, press SPACE BAR. Press the same key to restart

printing. To cancel printing, press CANCEL.

208