Brother WP330MDS - Manual (Page 164)

6. Press RETURN after the daisy wheel has been changed. Printing starts.
NOTE:
If the carrier is in a position which would extend the frame beyond the right end of
the printer when printing, the following message will appear on the message line:
Unable to print. Press CANCEL to exit or press RETURN to print.
NOTE:
Press
CANCEL
to return to the FRAMING INDEX screen. If you press
RETURN
instead, the following message will appear:
Select pitch. Move carriage to starting position, press RETURN.
Follow the same procedures as described in steps (2) through (6).
Using the Function Menu
The functions that are available on the function menu have already been explained in
the “File Operation” section of the WP application. The only difference is that, when
required to enter a file name, the extension “.FRM”, instead of “,WPT’, will be created
by the word processor.
Here is a list of the available functions:
Function Description
EXIT To return to the Main menu. You can also press
CANCEL.
COPY To copy a Framing file on the same diskette or to
another diskette. The word processor allows you to
enter a new
file name for the copy. See “Copying a
File” on page 82.
DELETE To delete a Framing file. See “Deleting a File” on
page 83
RENAME To rename a Framing file. See “Renaming a File” on
page 83.
ALL DELETE To delete all Framing files from the diskette. See
“Disk Copy” on page 88.
154