Brother WP330MDS - Manual (Page 88)

Option Definition
STARTING PAGE The page number of the file on which printing is to
start. The setting must be greater than zero and less
than 1000. The default is 1 (starting from the first
page).
ENDING PAGE The page number of the file on which printing is to
end. Must not be lower than the STARTING PAGE
number. If the number is higher than the total number
of pages, printing stops after the last page. The default
is 999.
NUMBER OF COPIES The number of copies you want to print. Must be
greater than zero and less than 100. The default is 1
(the pages are printed once).
HEADER PRINT Use SPACE BAR to switch between YES and NO. If
YES. any existing header will be printed on each page.
If NO, no header will be printed, even if you have
entered one.
FOOTER PRINT Use SPACE BAR to switch between YES and NO. If
YES, any existing footer will be printed on each page.
If NO, no footer will be printed, even if you have
entered one.
PAUSE FOR KB
CHANGE Use SPACE BAR to switch between YES and NO. If
YES, pauses will be made for changing the daisy
wheel when necessary. If NO, all pages will be printed
out using the same keyboard that is used for the first
character to be printed. However, if the character pitch
had been changed during the WRITE/EDIT mode,
pauses will be made for changing the daisy wheel
even if
NO is selected.
MERGE PRINT This should be left as NO when printing ordinary
document files. (See “Merge Printing” on page 95.)
DOUBLE COLUMNS This should be left as NO when printing ordinary
document files. (See “Double Column Printing” on
page 90.)
SPACE BET.
COLUMNS This is used together with the above double columns
printing and should be ignored when printing ordinary
document files. (See “Double Column Printing” on
page 90.)
78