Brother WP330MDS - Manual (Page 296)

Error Messages
Please consult the following table when an error message appears.
Message Cause Remedy
Memory full. You attempted an
operation that would
require more memory
than the total limit of 32
kilobytes.
Delete some parts of the
text using BACKSPACE,
CORRECT, WORD OUT,
CODE + LINE OUT, or the
block delete function.
You may also try to copy
a smaller block. Save the
file and start a new file.
Unidentified disk error.
Insert another and press
RETURN. Defective diskette. Consult your dealer.
You attempted to copy an
uninitialized source
diskette.
Initialize the diskette.
(This will erase any files
previously stored on the
diskette.)
Insert disk and press RETURN. The diskette is not
inserted when you start a
read operation, or the
diskette is removed
during read or write
operation (a message
was telling you to wait).
Insert the diskette and
press RETURN. Avoid
removing or inserting a
diskette while prompted
to wait.
Incorrect disk. Insert another
and press RETURN.
The selected file cannot
be found on the inserted
diskette (you changed
the diskette so that the
INDEX screen and the
inserted diskette do not
match).
Press CANCEL or
reinsert the correct
diskette and press
RETURN.
Disk is Write protected.
Release the protection and press
RETURN to retry. You are using a write-
protected diskette.
Use another diskette or
disengage the write pro­
tection.
Check printer. Malfunction of the printer
mechanism. Consult your dealer.
Check disk. Malfunction of the disk
drive. Consult your dealer.
286