Note – Brother WP330MDS User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings
Definition
PAPER SIZE
The total length of the paper. The default, 66 lines, is
suitable for letter-size paper.
TOP MARGIN
The distance between the top edge of the paper and
the header {if present) or the top of the text (when
there is no header). The default is 6 lines, which is one
inch.
HEADER
An optional running header. (See “Header and Footer'’
on page 70.)
TOP SPACE
The distance between the header (if present) and the
first line of the text. If you store a header, you must
enter a number for this selection.
TEXT AREA
The number of lines reserved for the body of the text.
BOTTOM SPACE
The distance between the last line of the text and the
footer (if present). If you store a footer, you must enter
a number for this selection.
FOOTER
An optional running footer. (See “Header and Footer'’
on page 70.)
BOTTOM MARGIN
The distance between the footer (if present) or the last
line of the text and the bottom edge of the paper. The
default is 6 lines, which is one inch.
5.
6
.
7
.
NOTE;
The text cursor cycles through only five of the eight fields on the screen.
HEADER, FOOTER
andTEXT
AREA
are automatically updated by the word
processor. The numbers
for HEADER and FOOTER
are automatically set to 1
line if you store a header or footer, or 0 lines if there is no header or footer. The
length of the
TEXT AREA
is defined as the
PAPER SIZE
less the lines reserved
for TOP MARGIN, HEADER, TOP SPACE, BOTTOM SPACE, FOOTER,
and
BOTTOM MARGIN.
Press
T
and
4-
until you reach the parameter that you wish to change.
Type the new value and press
T
and
i
to move to the next parameter that you
want to change. Notice how the text area value will change to accommodate your
selections.
When all the desired changes have been entered, press RETURN. Or, press
CANCEL to return without saving the new settings.
NOTE:
Your text will be divided into pages automatically according to the settings for the
paper size. If you wish to begin a new page prior to reaching the line set by the
paper size setting, press CODE + P BREAK.
69