KEYENCE N-410 - Manual (Page 82)

4-8
Con
trollin
g Mu
lti-
drop
Lin
k Mod
e
4
4-2 Multi-drop Link Mode Data Communication
Setting Auto-polling/Manual polling
Set auto-polling and manual polling for the N-410 Series in the following way.
 Setting with AutoID Navigator
Set in the "Slave settings" tab of AutoID Navigator.
Register the slave device types and check the boxes for ID registration as shown below when
setting the auto-polling mode.
Only register the slave device types and do not check the boxes for ID registration when setting
the manual-polling mode.
Send the settings to the N-410 Series device.
Check the boxes for
the ID registration Registration box for the slave
device types
The N-410 Series operates manual-polling
when there is no check in the box. Make sure to register the slave
device types.