KEYENCE N-410 - Manual (Page 6)

4
Package Contents
The following parts and devices can be found in this package. Confirm that all parts are present and
accounted for before using the device.
 N-410 package contents
 N-R4 package contents
 N-48 package contents  BL-U1 package contents
 NX-50RS package contents
N-410...1 User's manual...1
User's Manual
1 E N-R4-IM
Dedicated Communication Unit
RS-422A/485 Output Type
N-R4
Instruction Manual
■ General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-R4 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs.
• If the N-R4 is modified or used in any way other than described in
the specifications, its function and performance cannot be
guaranteed.
• When the N-R4 is used in combination with other instruments, the
function and performance may be effected by operating conditions
and the surrounding environment.
• Do not use the N-R4 for the purpose of protecting the human
body.
• The information contained in this manual is subject to change
without notice.
■ Notice
When this product is used under the circumstances and operating
environments described below, adhere to the limitations of the ratings,
take adequate measures to ensure safety such as fail-safe installations
and consult a KEYENCE sales representative.
•
For use under circumstances or environments which are not
described in the manual
• For use with nuclear power control, railway, aircraft, vehicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use in applications where death or serious property damage is
possible and extensive safety precautions are required.
■ For properly using the product
Do not install the N-R4 in the following locations:
• Locations subject to direct sunlight • Locations where the surrounding air temperature is outside the
range of 0 to +50qC or locations subject to condensation as the result of severe changes in temperature • Locations where the ambient humidity is outside the range of 35
to 85%RH.
• Locations subject to corrosive or flammable gases • Locations subject to dust, salts, iron dust, or oil smoke • Locations subject to shock or vibration • Locations subject to exposure of water, oil, or chemicals • Locations where strong magnetic or electric fields are generated
■ UL certification
The N-R4 complies with the following UL/CSA standards and has
obtained the UL/C-UL certification.
•
Applicable standards UL508, UL60950-1 • UL File No. E207185, E167973 • UL category NRAQ/NRAQ7, NWGQ2/NWGQ8 Be sure to observe the following installation and environment conditions.
• Pollution degree 2 • Overvoltage category I Caution - Do not connect directly to the branch circuit. This product must
be supplied power by a suitable, approved isolated transformer or power
supply not exceeding 200 VA max.
■ FCC regulations
The N-R4 complies with the following FCC EMI regulations.
•
FCC Part 15 Subpart B, Class B digital device ■ Canada IC (Industry Canada) regulations
The N-R4 complies with the following IC EMI regulations.
•
ICES-003, Class B digital apparatus ■ CE marking
The N-R4 complies with the following essential requirements of the EU
Directive.
•
EMC Directive (2004/108/EC) The following harmonized standards are applied to this product in order
to confirm the compliance.
•
Applicable standards (EMI) EN55011, Class A
EN55022, Class B
• Applicable standards (EMS) EN61000-6-2
EN61000-6-1
* The length of the communication and power cables should be less than 30 m.
DANGER Failure to follow these instructions may lead to death or
serious injury.
WARNING Failure to follow these instructions may lead to injury.
CAUTION Failure to follow these instructions may lead to product
damage (product malfunction, etc.).
Note Provides additional information on proper operation.
TIPS Indicates useful information or information that aids
understanding of text descriptions.
For Safely Using the Product
CAUTION
• Do not use the N-R4 in an environment subject to flammable, explosive, or corrosive gases. • Be sure that all screws are tightened securely.
• Use crimp contacts of the specified size for wiring.
• The N-R4 uses a 24 VDC power supply. Using a power
supply outside this range or an AC power supply may
cause product failure.
• Do not disassemble or modify the N-R4. This may cause product failure.
96M00269
CAUTION
• Locate the cables as far as possible from high-voltage lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions.
• The N-R4 is a precision instrument. If the unit is dropped or shock is applied, it may be damaged. Use
caution when unpacking, carrying, and mounting.
• Be sure to observe all warnings, cautions, and precautions specified in the manual.
Foreign Regulations and Standards
Package Contents List
1 E N-R4-IM
Dedicated Communication Unit
RS-422A/485 Output Type
N-R4
Instruction Manual
General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-R4 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs.
• If the N-R4 is used in any way other than described in the
specifications or if modified, its functions and performance cannot
be guaranteed.
• When the N-R4 is used in combination with other instruments,
functions and performance may be degraded, depending on the
operating conditions and the surrounding environment.
• Do not use the N-R4 for the purpose of protecting the human
body.
• The information contained in this manual is subject to change
without notice. Notice
When the product is used under the circumstances or environment
below, adhere to the limitations of the ratings and functions, take
countermeasures for safety precautions such as fail-safe installations
and consult a KEYENCE sales representative.
• For use under circumstances or environments which are not
described in the manual
• For use with nuclear power control, railway, aircraft, vehicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use for applications where death or serious property damage
is possible and extensive safety precautions are required For properly using the product
Do not install the N-R4 in the following locations:
• Locations subject to direct sunlight
• Locations where the ambient temperature is outside the range of
0 to +50°C or locations subject to condensation as the result of
severe changes in temperature
• Locations where the ambient humidity is outside the range of 35
to 85%RH.
• Locations subject to corrosive or flammable gases
• Locations subject to dust, salts, iron dust, or oil smoke
• Locations subject to shock or vibration
• Locations subject to exposure of water, oil, or chemicals
• Locations where strong magnetic or electric fields are generated UL approval
The N-R4 conforms to the following UL/CSA standards and has obtained
the UL/C-UL approval.
• Conforming standards UL508, UL60950-1 • UL File No. E207185, E167973 • UL category NRAQ/NRAQ7, NWGQ2/NWGQ8 When using the N-R4 as a UL approved product, be sure to observe the
following installation and environment conditions.
• Pollution degree 2
• Overvoltage category I FCC regulations
The N-R4 conforms to the following FCC EMI regulations.
• Conforming regulations FCC Part 15 Subpart B, Class B
digital equipment Canada IC (Industry Canada regulations)
The N-R4 conforms to the following IC EMI regulations.
• Conforming regulations ICES-003, Class B Digital equipment CE marking
The N-R4 conforms to the following essential requirements of the EU
directive.
• EMC directive (2004/108/EC) By checking the conformity to the following EN standards, the conformity
to the essential requirements of the EMC directive is checked and the CE
marking is indicated.
• Conforming standards (EMI) EN55011, Class A
EN55022, Class B • Conforming standards (EMS) EN61000-6-2
EN61000-6-1 * The length of the communication and power cables should be less than 30 m.
DANGER Failure to follow these instructions may lead to death or
serious injury. WARNING Failure to follow these instructions may lead to injury. CAUTION Failure to follow these instructions may lead to product
damage (product malfunction, etc.). Note Provides additional information on proper operation. TIPS Indicates useful information or information that aids
understanding of text descriptions. For Safely Using the Product
CAUTION • Do not use the N-R4 in an environment subject to
flammable, explosive, or corrosive gases.
• Be sure that all screws are tightened securely.
• Use crimp contacts of the specified size for wiring.
• The N-R4 uses a 24 VDC power supply. Using a power
supply outside this range or an AC power supply may
cause product failure.
• Do not disassemble or modify the N-R4. This may cause
product failure.
96M00275 CAUTION • Locate the cables as far as possible from high-voltage
lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions.
• The N-R4 is a precision instrument. If the unit is
dropped or shock is applied, it may be damaged. Use
caution when unpacking, carrying, and mounting.
• Be sure to observe all warnings, cautions, and
precautions specified in the manual.
Foreign Regulations and Standards
Package Contents List Main unit Instruction manual Connector for the RS-422A/485 Seal for the connectors
(used when wiring RS-422A) For 422 connector 1 E N-R4-IM Dedicated Communication Unit
RS-422A/485 Output Type
N-R4
Instruction Manual General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-R4 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs.
• If the N-R4 is used in any way other than described in the
specifications or if modified, its functions and performance cannot
be guaranteed.
• When the N-R4 is used in combination with other instruments,
functions and performance may be degraded, depending on the
operating conditions and the surrounding environment.
• Do not use the N-R4 for the purpose of protecting the human
body.
• The information contained in this manual is subject to change
without notice. Notice
When the product is used under the circumstances or environment
below, adhere to the limitations of the ratings and functions, take
countermeasures for safety precautions such as fail-safe installations
and consult a KEYENCE sales representative.
• For use under circumstances or environments which are not
described in the manual
• For use with nuclear power control, railway, aircraft, vehicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use for applications where death or serious property damage
is possible and extensive safety precautions are required For properly using the product Do not install the N-R4 in the following locations:
• Locations subject to direct sunlight
• Locations where the ambient temperature is outside the range of
0 to +50°C or locations subject to condensation as the result of
severe changes in temperature
• Locations where the ambient humidity is outside the range of 35
to 85%RH.
• Locations subject to corrosive or flammable gases
• Locations subject to dust, salts, iron dust, or oil smoke
• Locations subject to shock or vibration
• Locations subject to exposure of water, oil, or chemicals
• Locations where strong magnetic or electric fields are generated UL approval
The N-R4 conforms to the following UL/CSA standards and has obtained
the UL/C-UL approval.
• Conforming standards UL508, UL60950-1
• UL File No. E207185, E167973
• UL category NRAQ/NRAQ7, NWGQ2/NWGQ8 When using the N-R4 as a UL approved product, be sure to observe the
following installation and environment conditions.
• Pollution degree 2
• Overvoltage category I FCC regulations
The N-R4 conforms to the following FCC EMI regulations.
• Conforming regulations FCC Part 15 Subpart B, Class B
digital equipment Canada IC (Industry Canada regulations)
The N-R4 conforms to the following IC EMI regulations.
• Conforming regulations ICES-003, Class B Digital equipment CE marking
The N-R4 conforms to the following essential requirements of the EU
directive.
• EMC directive (2004/108/EC) By checking the conformity to the following EN standards, the conformity
to the essential requirements of the EMC directive is checked and the CE
marking is indicated.
• Conforming standards (EMI) EN55011, Class A
EN55022, Class B
• Conforming standards (EMS) EN61000-6-2
EN61000-6-1
* The length of the communication and power cables should be less than 30 m. DANGER Failure to follow these instructions may lead to death or
serious injury. WARNING Failure to follow these instructions may lead to injury. CAUTION Failure to follow these instructions may lead to product
damage (product malfunction, etc.). Note Provides additional information on proper operation. TIPS Indicates useful information or information that aids
understanding of text descriptions. For Safely Using the Product CAUTION • Do not use the N-R4 in an environment subject to
flammable, explosive, or corrosive gases.
• Be sure that all screws are tightened securely.
• Use crimp contacts of the specified size for wiring.
• The N-R4 uses a 24 VDC power supply. Using a power
supply outside this range or an AC power supply may
cause product failure.
• Do not disassemble or modify the N-R4. This may cause
product failure. 96M00275 CAUTION • Locate the cables as far as possible from high-voltage
lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions.
• The N-R4 is a precision instrument. If the u nit is
dropped or shock is applied, it may be damaged. Use
caution when unpacking, carrying, and mounting.
• Be sure to observe all warnings, cautions, and
precautions specified in the manual. Foreign Regulations and Standards Package Contents List Main unit Instruction manual 1 E N-R2-IM Dedicated Communication Unit
RS-232C Output Type N-R2
Instruction Manual General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-L1 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs.
• If the N-L1 is used in any way o ther than descri bed in the
specifications or if modified, its functions and performance can not
be guaranteed.
• When the N-L1 is used in combination with other instruments,
functions and performance may be degraded, depending on the
operating conditions and the sur rounding environment.
• Do not use the N-L1 for the purpose of protecting the h uman body.
• The information contained in this manual is subject to change
without notice.
Notice
When the product is used under the circumstances or environment
below, adhere to the limitations of the ratings and f unctions, take
countermeasures for safety preca utions such as fail-safe installations
and consult a KEYENCE sales representati ve.
• For use under circumstances or environments which are not
described in the manu al
• For use with nu clear power control, railway, aircraft, ve hicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use for applications where death or serious property damage
is possible and extensive safety precautions are required
For properly usin g the product
Do not install the N-R2 in the follo wing locations:
• Locations subject to direct sunlight
• Locations where the ambient temperature is outside the range of
0 to +50°C or locations subject to condensation as the result of
severe changes in temperature
• Locations where the ambient humidity is outside the range of 35
to 85%RH.
• Locations subject to corrosive or flammable gases
• Locations subject to dust, salts, iron dust, or oil smoke
• Locations subject to shock or vibration
• Locations subject to exposure of water, oil, or chemicals
• Locations where strong magnetic or electric fields are generated
UL approval
The N-R2 conforms to the follo wing UL/CSA standards and has o btained
the UL/C-UL appro val.
• Conforming standards UL508, UL60950-1
• UL File No. E2071 85, E167973
• UL category NRAQ/NRAQ7, NWGQ2/NWGQ8 When using the N-R2 as a UL appro ved product, be sure to observe the
following installation and en vironment conditions.
• Pollution degree 2
• Overvoltage category I
FCC re gulations
The N-R2 conforms to the follo wing FCC EMI reg ulations.
• Conforming regulations FCC Part 15 Subpart B, Class B
digital equipment
Canada IC (Industry Canada re gulations)
The N-R2 conforms to the follo wing IC EMI reg ulations.
• Conforming regulations ICES-003, Class B Digital equipment
CE markin g
The N-R2 conforms to the follo wing essential requirements of the EU
directive.
• EMC directive (2004/108/EC) By checking the conformity to the follo wing EN standards, the conformity
to the essential re quirements of the EMC directi ve is checked and the CE
marking is indicated.
• Conforming standards (EMI) EN55011, Class A
EN55022, Class B
• Conforming standards (EMS) EN61000-6-2
EN61000-6-1 * The length of the comm unication and po wer cables should be less than 30 m.
DANGER Failure to follow these instructions may lead to death or
serious injury. WARNING Failure to follow these instructions may lead to injury. CAUTION Failure to follow these instructions may lead to product
damage (product malfunction, etc.). Note Provides additional information on proper operation. TIPS Indicates useful information or information that aids
understanding of text descriptions. For Safely Usi n g the Product CAUTION • Do not use the N-L1 in an environment subject to
flammable, explosive, or corrosive gases.
• Be sure that all screws are ti ghtened securely.
• Use crimp contacts of the specified size for wirin g.
• The N-L1 uses a 24 VDC power supply. Usin g a power
supply outside this ran ge or an AC power supply may
cause product failure.
• Do not disassemble or modify the N-L1. This may cause
product failure. 96M00266 CAUTION • Locate the cables as far as possible from hi gh-volta ge
lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions. • The N-R2 is a precision instrument. If the unit is
dropped or shock is applied, it may be dama ged. Use
caution when unpackin g, carryin g, and mountin g. • Be sure to observe all warnin gs, cautions, and
precautions specified in the manual. Foreign Re gulations and Standards Packa ge Contents List Main unit Instruction man ual 1 E N -R2-IM Dedicated Comm unication Unit RS-232C O utp ut Type N-R2 Instruction Manual General precautions •At start up and d uring operation, be s ure to check that the functions and performance of the N -L1 is operating properly. •W e recommend that yo u take s ub stantial safety meas u res to a void any damage in the e v ent a pro blem occ u rs. •If the N -L1 is u sed in any w ay other than descri b ed in the specifications or if modified, its f unctions and performance cannot be g uaranteed. •W hen the N -L1 is u sed in com b ination w ith other instr u ments, functions and performance may be degraded, depending on the operating conditions and the s urro unding en v ironment. •Do not use the N -L1 for the p urpose of protecting the h uman body. •The information contained in this man ual is s ub ject to change w itho ut notice. Notice W hen the prod uct is used under the circ umstances or en v ironment b elo w , adhere to the limitations of the ratings and f unctions, take co u ntermeas ures for safety preca utions s uch as fail-safe installations and cons u lt a KEYE N CE sales representati v e. •For u se u nder circ u mstances or en vironments w hich are not descri bed in the man ual •For u se w ith n uclear po w er control, rail w ay, aircraft, vehicles, incinerators, medical e qu ipment, entertainment e qu ipment, safety de vices etc. •For u se for applications w here death or serio us property damage is possi ble and extensi ve safety preca utions are re qu ired For properly usin g the product Do not install the N -R2 in the follo w ing locations: •Locations s ub ject to direct s unlight •Locations w here the am b ient temperat ure is o utside the range of 0 to +50 °C or locations s ub ject to condensation as the res ult of se vere changes in temperat ure •Locations w here the am b ient h u midity is o u tside the range of 35 to85% RH. •Locations s ub ject to corrosi ve or flamma ble gases •Locations s ub ject to d ust, salts, iron d u st, or oil smoke •Locations s ub ject to shock or vib ration •Locations s ub ject to expos ure of w ater, oil, or chemicals •Locations w here strong magnetic or electric fields are generated UL approval The N -R2 conforms to the follo w ing UL/CSA standards and has o btained the UL/C-UL appro val. •Conforming standards UL50 8 , UL60950-1 •UL File N o. E2071 85, E167973 •UL category N RAQ/ N RAQ7, NW GQ2/ NW GQ 8 W hen u sing the N -R2 as a UL appro ved prod uct, be s ure to o bser ve the follo w ing installation and en vironment conditions. •Poll u tion degree 2 •O v er voltage category I FCC re g ulations The N -R2 conforms to the follo w ing FCC EMI reg ulations. •Conforming reg ulations FCC Part 15 S ub part B, Class B digital e qu ipment Canada IC (Industry Canada re g ulations) The N -R2 conforms to the follo w ing IC EMI reg ulations. •Conforming reg ulations ICES-003, Class B Digital e qu ipment CE markin g The N -R2 conforms to the follo w ing essential re qu irements of the EU directi ve. •EMC directi v e (2004/10 8/EC) By checking the conformity to the follo w ing E N standards, the conformity to the essential re qu irements of the EMC directi ve is checked and the CE marking is indicated. •Conforming standards (EMI) E N 55011, Class A E N 55022, Class B •Conforming standards (EMS) E N 61000-6-2 E N 61000-6-1 * The length of the comm unication and po w er ca b les sho uld be less than 30 m. DANGER Failure to follow these instructions may lead to death or serious injury. WARNING Failure to follow these instructions may lead to injury. CAUTION Failure to follow these instructions may lead to product dama g e (product malfunction, etc.). Note Provides additional information on proper operation. TIPS Indicates u sef u l information or information that aids u nderstanding of text descriptions. For Safely Usin g the Product CAUTION •Do not use the N-L1 in an environment subject to flammable, explosive, or corrosive g ases. •Be sure that all screws are ti g htened securely. •Use crimp contacts of the specified size for wiri n g . •The N-L1 uses a 24 VDC power supply. Usin g a power supply outside this ran g e or an AC power supply may cause product failure. •Do not disassemble or modify the N-L1. This may cause product failure. 96M00266 CAUTION •Locate the cables as far as possible from hi g h-volta g e lines and power li nes. Otherwise, g enerated noise may cause product failure or malfunctions. •The N-R2 is a precision instrument. If the unit is dropped or shock is applied, it may be dama g ed. Use caution when unpackin g , carryin g , and mountin g . •Be sure to observe all warnin g s, cautions, and precautions specified in the manual. Forei g n Re g ulations and Standards Packa g e Contents List Main unit Instr uction man u al Connector for the RS-422A/485 Seal for the connectors
(used when wiring RS-422A) For 422 connector
Main unit Instruction manual
Connector for the RS-422A/485 Label for the connectors
(used when wiring RS-422A)
For 422 connector
N-R4...1 Instruction manual...1 Connector for
RS-422A/485...1
RS-422A
Terminal layout label...1
BL-U1...1 N-48...1 Instruction manual...1
Instruction Maual
NX-50RS...1 RS-485
connector...1 Instruction manual...1
Instruction Maual