KEYENCE N-410 - Manual (Page 154)

A-18
A
p
p
endi
ces
8
Factory Default Settings
The section shows the factory default settings for the N-410.
 Main settings
 Slave settings
 Protocol selection
 RS-232C settings
 RS-485 settings
Operation mode Multi-drop link mode
Slave ID number registrations Not registered
Host protocol No handshake
Header None
Delimiter CR
ID addition Do not activate
Add checksum Do not activate
Error code settings ERROR
PLC Link Disable
Baud rate 115200 bit/s
Data bits 8 bit
Parity None
Stop bit length 1 bit
RTS/CTS Disable
Baud rate 115200 bit/s
Data bits 8 bit
Parity None
Stop bit length 1 bit