Installing an nx-50rs, Installing an n-48, Installing an nx-50rs -34 installing an n-48 -34 – KEYENCE N-410 User Manual

Page 56: Mounting with din rails

2-8

Installation

2-34

Installing an NX-50RS



Mounting with DIN rails

This section explains how to install the device on a DIN rail.

Place the device above the DIN rail.
Hook the upper DIN rail hooks over the top of the
rail.

Press on the device until you hear a click and
the device is firmly fixed to the rail.

To remove the device from the DIN rail, press down
on the DIN rail clamps while pulling forward on the
device.

Installing an N-48

To install an N-48, fasten the device to the mounting surface with screws in the screw holes.
*The mounting screws are not provided with the device.

DIN rail hooks (upper)

DIN rail

Locked

Loose

63.2 mm

43.2 mm

N-42 : 26 mm

Mounting screw

Mounting hole
2-

φ4.5 mm