KEYENCE N-410 - Manual (Page 2)

Introduction
Thank you for purchasing the N-410 RS-485 master unit.
The N-410 can be used as a master unit on a multi-drop link network of KEYENCE BL Series
barcode readers, SR Series code readers, and RF Series RFID system.
This manual explains the connections, communications and additional functions for using the
N-410 on a multi-drop link network with BL/SR/RF Series devices.
Please read this manual carefully.
The devices that can be connected to the N-410 are the BL-700 Series, the BL-600 Series, the BL-
180 Series, the BL-210 Series, the RF-500 Series, the SR-500 Series, the BL-1300 Series, and the SR-
600 Series.
 Manuals related to the N-410
Be sure to read the following manuals when using the N-410.
Manual Contents
BL-700 Series
BL-U1, BL-U2, N-42
User’s Manual This explains the connections, wiring, installation, settings and notes for the BL-
700 Series long-range laser barcode reader and the BL-U1, BL-U2 and N-42
communication units.
BL-600 Series
User’s Manual This explains the connections, wiring, installation, settings and notes for the BL-
600 Series ultra-short range laser barcode reader.
BL-180 Series
User’s Manual This explains the connections, wiring, installation, settings and notes for the BL-
180 Series ultra-short range CCD barcode reader.
BL-210 Series
User’s Manual This explains the connections, wiring, installation, settings and notes for the BL-
210 Series handy laser barcode reader.
RF-500
Installation and
Connection Manual
This manual explains the connections, installation and operation of the RF-500
Series and related devices.
RF-500
Operation Manual
This section explains the operation of the devices that make up the system, the
settings for operation
and
the communication commands for those devices.
AutoID Navigator
User’s Manual
(PDF only)
This explains the indicates operation and settings for the AutoID Navigator
general AutoID system setting software.
N-410
User’s Manual
This manual.
This explains the settings and procedures required for installation, connection
and operation of the N-410 RF-485 master unit.
SR-500 Series
User’s Manual This explains the connections, wiring, installation, settings and notes for the SR-
500 Series fixed 2D code reader.
BL-1300 Series
User’s Manual This explains the connections, wiring, installation, settings and notes for the BL-
1300 Series laser barcode reader.
SR-600 Series
User’s Manual This explains the connections, wiring, installation, settings and notes for the SR-
600 Series fixed 2D code reader.