6 bl-u1 connections and wiring, Electrical wiring, Connecting to a bl/sr/rf series device – KEYENCE N-410 User Manual

Page 48: Bl-u1 connections and wiring -26, Bl-u1 connections and wiring, Caution

Text mode
Original mode

2-26

Inst
allatio

2-6

BL-U1 Connections and Wiring

To use an AC powered BL-U1, use connections like the following.

Electrical Wiring

Connect the BL-U1 power cable to the power outlet.

Use an AC power supply within the range of 240 V AC ± 10% (50 / 60 Hz).

Connecting to a BL/SR/RF Series Device

Connect a BL-700/600/180 Series or 210RK device to the reader board of the BL-U1.

When connecting a BL-1300 Series/SR Series/RF Series device to the BL-U1, use a option D-sub
converter cable.
* The baud rate of a code reader connected to the BL-U1 should be 38400 bps or less.

FG wire

Caution

BL-U1

Computer

RS-232-C cable (OP-22149)

Converter connector (OP-25057)

D-Sub converter cable

(RF-CM2D)

(BL-1300, SR:OP-80616)