KEYENCE N-410 - Manual (Page 54)

Inst
allatio
n
2
2-32
2-8
Installation
Installation Notes
This is a precision instrument. Be sure that the operating environment is safe and avoid placing
the device in locations like the following.
• Locations that receive direct sunlight or with a temperature range outside of 0
°
C to 55
°
C
• Locations with a relative humidity higher than 35 to 85% or locations that are subject to condensation
due to rapid temperature change.
• Areas with explosive or corrosive gasses, dust, salt, iron powder or soot
• Locations where the device may be subject to vibrations or sudden impact
• Locations with a risk of exposure to airborne water, oil or chemical droplets
• Locations with strong magnetic or electrical fields
• Do not lay the cabling for this device in the same conduits that carry electrical power cables.
Make sure that the area to which the device will be installed meets the following conditions.
• There is enough space for air flow.
• If the operating temperature goes above between 0
° C and 55 ° C, a strong fan or a cooler will
regulate the temperature.
• Do not install this device inside any high voltage devices.
• Install this device as far away from power cords as possible.