Canon 700 Series - Manual (Page 67)

Setting Up One-Touch Speed Dialing 2-10
2
Using Speed Dialing
16
Enter the time in 24-hour notation using the numeric keys
(e.g., 1:00 p.m. as 13:00)
➞ press [Set].
The message appears on the LCD display for a few seconds.
NOTE
• If you want to clear the time you have set, press
(Stop) ➞ repeat the procedure
from the beginning
➞ press
(Clear) at this step
➞ press (Set).
• If you want to set another time, repeat the procedure from step 15.
• To end this procedure and return to the Standby mode, press
(Stop).
17
To continue registration, and set other options for the current
key, press [Data Registration].
18
If you want to set the transmission type, press [ ▼ ] or [ ▲ ] until
<3.TX TYPE> appears
➞ press [Set].
If you do not want to perform this setting, proceed to step 20.
19
Press [ ▼ ] or [ ▲ ] to select the desired transmission type
➞
press [Set].
There are several TX TYPE items to select. For details, see the table below.
● If you select ‘REGULAR TX’:
❏ Proceed to step 20.
● If you select another TX Type:
❏ Set the ITU-T password and subaddress for the feature you select.
❏ Proceed to step 20.
➞
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
C Set
Data
Registration
Set
Set