Canon 700 Series - Manual (Page 216)

Using Memory Lock 9-11
9
Special Sending/Receiving F
eatures
4
Press [ ▼ ] or [ ▲ ] until <7.SYSTEM SETTINGS> appears
➞
press [Set].
If the prompt is displayed, enter the System
Administrator’s password using the numeric keys
➞ press
(Set).
5
Press [ ▼ ] or [ ▲ ] until <1.MEMORY LOCK RX> appears
➞ press
[Set].
6
Press [ ▼ ] or [ ▲ ] to display
➞ press [Set].
If you select , press (Stop) to return to the Standby mode.
7
Press [ ▼ ] or [ ▲ ] to display the desired Memory Lock setting
➞
press [Set].
The MEMORY LOCK RX menu includes the following items:
➞
➞
➞
Setting Description
1.MEM LOCK PASSWORD 0 to 9999999
This password protects the Memory Lock settings.
Setting a password is recommended. You must use
this password to unlock the memory so you can print
documents stored in memory.
Use the numeric keys to enter a password (up to
seven digits)
➞ press [Set].
Set
Set
Set
Set
Set